Tuesday, May 29, 2012

Outdoor Drapery Panels

Outdoor drapery panels are becoming increasingly popular!  I think they bring a touch of the indoor whimsy to outdoor spaces.  They also have a few practical uses too.  They can lend a hand with the harsh sun and add a touch of privacy to outdoor seating areas.
Here's just a few images I found on the Internet.




Although in these images a cool summer breeze against the panels looks appealing, the wind can actually blow outdoor panels all over the place causing more havoc than whimsy.

I've been making outdoor panels for clients for years and here's a full tutorial on making outdoor panels with a bonus tip on how to keep them from blowing around when a cool summer breeze comes along.

I'm making 2 panels that will be 2 widths of fabric each.  You always want to make sure you have plenty of fullness when making outdoor panels.
My panels will finish at 94" long.

So lets figure our cuts.  94" plus 4" (double 2" bottom hem) plus 4" (double 2" top hem) plus 2" to straighten/table the fabric.  Now I'm only making my top hem/header 2" wide because I'm using fairly small grommets.  If you decide to use larger grommets than mine, adjust your top hem/header to be wider.  You want your grommets to be centered in the top hem.

Cutting- For 2 panels that will be 2 widths of fabric each I cut 4 @ 104" long.

Seam- I made my seams with my over lock/serger.  But you can make french seams if you don't have an over lock machine.  You just want to make sure your seams look nice on both sides of the panel.

Since I have a special tip for keeping these from blowing around, I construct them in a little different order than I usually do with drapery panels.  We will be doing our top hem aka header first.

Top Hem/Header- Press a double 2" top hem.  First press down 4", then straighten out and press the top edge to the 4" crease and press over.  Pin every 8-10 inches.  There is no need to stitch this top edge!  The grommets will hold the top hem in place.  Next we will do our side hems.



Side Hems-  Press over a double 1 1/2 " side hem on both sides of the panel.  Start by pressing up a 3" hem, then open out and press the side to the 3" crease mark.



Pin your side hems in place.  I pinned mine this way because I intended to sew them with my blind hemmer, but the fabric was not feeding through my blind hemmer correctly so I ended up top stitching my hems instead.  Stitch your side hems.


Now we need to "table" our panels and press up the bottom hem.  Tabling is when you measure and cut the excess fabric off that you added in your original measures.  I'm sure you're wondering why we add excess to begin with if we're just going to cut if off.  Well, Folding and pressing and stitching take up slightly more fabric than you would think.  Plus the seams gather up the fabric ever so slightly and can cause your panels to be sorter where the seams are. 

Tabling-  I have a large workroom table that I do mine on, but you can do yours on a hard floor or any other surface you can find that will work.  Anchor your top edge of your panels along a straight edge.  you can tape it to the straight edge of a floor tile.  Now measure down your finished length plus your bottom hem allowance.  Mine in this case is 98".  You can run a row of painters tape at your measured edge to help guide you where to cut. 

Cut the excess off.

Bottom hem-Now press up a double 2" hem using the same method as you did for the side and top hems.
Stitch the bottom hem.

I'm putting size #4 grommets in the top of my panels.  You can use whatever size you want.
There's a few things you need to know about grommets....You ALWAYS have to use an even number of grommets!!!  I usually set my grommets approx 6" apart.  That means center of the grommet to center of the next grommet.  But if you want your fabric to droop between the grommets then you might want to space them 10" apart.  The spacing isn't as important as the fact that you use an even number of grommets!
So first I decided how far in from the edge I wanted my first and last grommet.
I usually place my first grommet just after the side hem.  So mark your first and last grommet placement.  Now measure the distance between theses two grommets and divide by 6".   Whatever this number turns out to be, round it up or down to be an odd number.  Now take this odd number and divide it into the distance between your 2 side grommets....this will be your exact distance between each grommet (center to center)  This number may turn out to be anywhere from 5"- 6 1/2".  That's ok.  It's approx. 6" that we are shooting for.
After you have all your grommet placements marked, count again and make sure you have an even number of grommets.  I set grommets all the time and I have even screwed this up before, so now I always double check.
Here's the grommets I will be using.
There are 2 pieces to every grommet.  The one with the shank is the front of the grommet, and the one that is flat like a washer (although this one has teeth) is the back of the grommet.
I take the front grommet piece and center it along my header and trace the inside circle with a pencil.  This makes it easier for me to see exactly where I need to cut my holes for the grommets.
Being that I make these all the time in my business, I own a grommet setting machine.  Since you probably don't have a grommet setter, there are other grommet setting tools on the market.  When I first started my business, I just used the ones you hammer with a piece of scrap wood.  

Setting Grommets-First you have to cut all the holes for the grommets, so I attached the cutting tool to my grommet machine.  Under the cutter goes a plastic cutting mat to help prevent dulling of the cutter.

Cut all the holes.

Once all my holes were cut, I switched the attachments from the cutter to the setter pieces.
The front grommet piece goes down on the setter, then I slip my fabric over the shank and place a back grommet piece on top with the gripper teeth down.


My machine takes a little muscle to set the grommets tight, so I usually have my teenage son do this part for me.  I love that he is at the age where I can use his muscle power!

Now here's the tip for keeping these panels from blowing around.......Chain.  Just plain old chain that you get at your hardware store.

Measure the finished width of your panel and have a piece of chain cut for each panel.  You want your chain to be approx. 2" shorter than the width of your panel.  If you are using a dark heavy fabric for your outdoor panels, than there is no need to cover the chain.  Simply feed it into your bottom hem and tack it at the side edges with a few hand stitches.
If you're using a white light weight fabric like I am, then you will need to make a casing tube for your chain so that it will not be seen through the sheer fabric.

I cut long lengths of white lining 2" wide.  I fold it in half the length of the tube and stitch forming a long tube. I turn it right side out. 

 Feed the chain into this long tube.

  Turn under the edge of one end of the tube and stitch it closed.  Your stitching doesn't have to be perfect, no one will ever see this part.  Now hand tack your chain to the tube a little ways back from the end of the tube.  An inch or so is good. 

Once you get all the chain fed into the tube, close off the other end of the tube the same way.  Make sure you also hand tack through the chain and tube to keep the chain from slipping around inside the tube.

Feed the tube/chain combo into your bottom hem of your panels.  Pull the end of the tube to the very edge of your panels side edges but not far enough where it hangs out the side hems.
Now top stitch across the sides of the bottom hem making sure to catch the tube ends at the same time.
No more outdoor panels flapping around on a windy day!
Pin It

45 comments:

  1. When was this tutorial when I needed it a few years ago LOL... this is a wonderful idea, ours still fly around. Thanks for linking up.

    ReplyDelete
  2. Excellent tutorial, and great photos! I would love to have these in my outdoor space, so pretty :)

    Tanya

    ReplyDelete
  3. The chain is such a great idea. I've used drapery weights before, but having the weight span the full width makes much more sense.

    ReplyDelete
  4. The chain! That answers the question I have whenever I see outdoor drapery -- namely what keeps them from blowing horizontal? Thanks for this info! Besides adding privacy and shade, they can hide a less-than-perfect view of neighboring property.

    ReplyDelete
  5. This is a great tutorial. I love the look of billowing white drapes. I'm just curious, how do sew the chain enclosure so that you can remove it for washing the curtains? (I'm a beginner sewer, so I apolegize if I missed this.)

    I followed you over from the 1929 Charmer linky party. I would love if you stopped by my blog.

    Thanks for sharing,
    Laura

    ReplyDelete
    Replies
    1. Maybe try a hook, snap, or button to connect the ends of the chain enclosure to the drapes instead of sewing them. Easily removed for washing, and easily replaced after.

      Delete
  6. Great tutorial! I'm a seamstress and the instructions were nice and clear for any level sewer!
    Blessings, Lorraine

    ReplyDelete
  7. You have the best tutorials!! Now I just need to build something that needs outdoor curtains. :-) Thanks for sharing on Tout It Tuesday!

    ReplyDelete
  8. What type of fabric do you use? Outdoor fabric is so expensive and I am concerned that untreated fabric will get moldy when it rains.

    ReplyDelete
    Replies
    1. Hi there, I used painters drop clothes that I bought at Lowes/home depot, they get dirty and I just put them in the washing machine with some bleach and htey are fine, we used chain link fence rail to hang them from as the drop cloths are much heavier....but the work awesome

      Delete
  9. I have a long span of interior grommet panel curtain over my sliding door. When I want cover the window, I have to putter back and forth to get the grommets evenly spaced. Otherwise the panels keep stacked on one side. Do you have any recommendations for ensuring your grommet panels pull evenly when they are fully open?
    I was thinking of sewing in a certain length of chain between each grommet, but am wondering if there is a better idea?

    ReplyDelete
    Replies
    1. HeidiJJJ, Thank you so much for both of your suggestions, still undecided on which way to proceed.

      Would appreciate any and all suggestions. It just seems like I can't be the only one to have this issue with grommet panels

      Delete
  10. What a great tip about the chain! I was wondering how to make the curtains I'm planning not blow around too much. Thanks for this detailed tutorial.

    ReplyDelete
  11. Very nice, please link it up with me today at Wow Us Wednesday.

    ReplyDelete
  12. i love that you used grommets, i love them for a modern feel. great job!

    ReplyDelete
  13. What a great tutorial! Thanks for sharing! So glad you linked this to Things I've Done Thursday!

    ReplyDelete
  14. I have dreams of a covered porch with billowing curtains... Sigh!

    ~Ellie @ beauty4ashes-ellie.blogspot.com

    ReplyDelete
  15. Genius. What a perfect way to enhance your outdoor space.

    ReplyDelete
  16. Love the tutorial - thanks so much. We're in South Mississippi (think wiped out by Katrina!) and get a lot of rain on our screened-in back porch. Even outdoor fabrics such as Sunbrella take a beating. Any suggestions for protecting the fabric? I thought about lining them with shower curtains....is that crazy, lol?

    ReplyDelete
  17. GREAT tutorial!! Gosh I wish I had a place to install drapes outside!! Great idea!

    Thanks so much for sharing this at The DIY Dreamer.. From Dream To Reality!

    ReplyDelete
  18. I am getting drop clothes tomorrow for my outdoor space. And the chain idea - Brillant!! I don't really want plain curtains so I thought I would buy a decorative outdoor fabric for the tie backs and I might even use it at the bottom as a strip---pillows of course will be made of the same fabric or a cool contrast. Can't decide - off to Home Depot....Thanks Loads....

    ReplyDelete
  19. Hello,

    Outdoor drapery panels as you say that it becomes more popular now days and the steps for creating this which are described by you are easy and clear anyone can learn to see your step...I would say thanks for this quality knowledge...

    Thank you

    ReplyDelete
  20. Those drapery panels are really perfect for the summer season. They can create cool and refreshing vibe that beach cottages have, especially if you have a wider porch balcony. Thanks for your tutorial! It's awesome.

    Brad Wike

    ReplyDelete
  21. A chain! yes! thanks :)

    ReplyDelete
  22. Will the chain rust and show through the sheer fabric from being outside and getting watered? Do you know if the cord-like drapery weights rust or not?
    Thanks!

    ReplyDelete
  23. Wow. The most detailed tutorial I have ever read. Thanks for the info. I am wanting to hang curtains at our house on Dauphin Island, Alabama. We want to screen in an area, and it catches the midday sun full on. I had the hanging part figured out, but it can be pretty breezy on the north side and east end of the Island. I could just see flapping curtains every where!!! Love the covered chains. I also wondered about about using a runner of some sort on the bottom.They are behind the cross pieces, so no traveling through. Thank you for the tips, and the pillow info was great too. Hmmmm, just might have to try the zipper bu the yard. Beach music, people, beach music.

    ReplyDelete
  24. Wow. The most detailed tutorial I have ever read. Thanks for the info. I am wanting to hang curtains at our house on Dauphin Island, Alabama. We want to screen in an area, and it catches the midday sun full on. I had the hanging part figured out, but it can be pretty breezy on the north side and east end of the Island. I could just see flapping curtains every where!!! Love the covered chains. I also wondered about about using a runner of some sort on the bottom.They are behind the cross pieces, so no traveling through. Thank you for the tips, and the pillow info was great too. Hmmmm, just might have to try the zipper bu the yard. Beach music, people, beach music.

    ReplyDelete
  25. CHAINS! Oh, you are my BEST friend today! I've been fighting with flying, billowing curtains for days and here I find YOU and your BRILLIANT idea! Of course, now I'm going to have to open up the hem and finagle the chains in but SO worth the effort. I was ready to burn them babies! LOL! Thank you!!

    ReplyDelete
  26. Great tutorial! I was going to use washers to weight my outdoor curtains (for a screened porch) but I like your chain idea. I guess the trick is in getting something heavy enough but not too heavy. I am wondering about rusting though - mine will definitely get wet. I am thinking about covering the chain in tape, or does someone have a better idea that would be cheap and easy (always my #1 combination lol)?

    ReplyDelete
  27. We have number one Karachi Escorts Beauties  which provide you extreme pleasure with their extra ordinary skills. We are always adding well looking Escorts Girls in Karachi for best and better service VIP Escorts in Karachi know exceptionally well how they can fulfill their clients and happy we promise you that our Pakistan Escorts will be not let down you at in any case. 

    ReplyDelete
  28. Grommet curtains

    Buy Custom Made Window Curtains and Drapes Online for your Bedroom and Home at Affordable Prices. Shipping is Free!

    https://www.spiffyspools.com/collections/curtains

    ReplyDelete
  29. Grommet curtains

    to get more - https://www.spiffyspools.com/


    Buy extra long curtains. Order extra wide drapes. Any size custom curtains, drapes, shades and window panels online at SpiffySpools.com.

    ReplyDelete
  30. I was very happy to locate this web-site. I wished to many thanks for your time for this fantastic read!! I most definitely appreciating every little of it and also I have you bookmarked to take a look at new stuff you blog post.

    야한동영상

    ReplyDelete
  31. I could not refrain from commenting. Exceptionally well written.

    오피

    ReplyDelete
  32. You’re so interesting! I don’t suppose I’ve truly read through anything like this before. So nice to discover someone with a few genuine thoughts on this subject matter. Seriously.. thank you for starting this up. This web site is something that is required on the internet, someone with a bit of originality.

    출장안마

    ReplyDelete
  33. I am usually to blog writing and also I actually appreciate your content. The post has really peaks my rate of interest. I am going to bookmark your site as well as keep checking for new information.

    타이마사지

    ReplyDelete