Sunday, March 4, 2012

Bolster Pillow- Button Tufted with Flat Ends

Hope everyone is having a wonderful weekend!  I've been busy in my workroom sewing up a storm for my favorite designer.  Which means I have a new tutorial to share.
A Bolster Pillow with Covered Button Tufted Flat Ends.
Isn't it adorable!  It's not quite as easy as the other bolsters I have shown, but it is still a pretty easy pillow to make.
I made two of these for my designer.  They are for the sides of a daybed.  The daybed measured 71x38, so these bolsters were made 38" long and 9" high.

What you'll need:
1 yd of fabric per bolster
1/4 yd contrasting fabric for the ends
zipper or zipper by the yard
thread
2 button forms or large buttons
2 yds of upholstery batting


As always, we have to do our math first.
If the diameter of our finished end circle is 9", then we need to multiply that by pi (3.14) which equals roughly 28 1/4".  So it will take 28 1/4" to go around our bolster.  Now we need to add our zipper allowance.  I add 1 1/2", so we need to have 29 3/4" to go around the circle and accommodate our zipper.
Since I made this bolster to be 38" long, we need to add 1/2" seam allowance to both ends. (38=1/2"=1/2"+=39")
So we will be cutting our main piece 39" wide x 29 3/4" long.
Next we need to cut our two circle ends.  Add 1/2" seam allowance all the way around, so we need to cut two 10" circles.
In order to cut circles, you can trace a plate if you have one that measures 10" exactly.  
Cut and sew approx. 60" worth of welt cord.  See how to cut and cover welt cord here.

Mark the center bottoms of your circles with a small clip into the fabric.  Laying your welt 1/2" past that clip mark, start sewing at the clip mark.  Use a zipper foot to get close to the welt cord edge.  Clip into the seam allowance of your welt about every 3/4" or so to accommodate the curve of the circle.
When you're almost all the way around the circle pause with your needle down and extend the welt 1" past the starting welt.  Cut the welt 1" past the starting welt.  Open the seam allowance of the welt 2".  Turning under 1/2 of the fabric that covers the welt and placing it under your starting welt.  Now cut off the ending welt filler cord even with your starting welt.  fold the fabric welt cover over the starting welt cord and finish stitching to join the welt cord.  Sorry I forgot to get pictures of this whole process on this pillow, but you can see pictures of the process on my Fan Fold Pillow tutorial here.
Once you have the welt cord stitched to both the circle ends, it's time to insert the zipper.
I always serge or finish the edges that are going to be sewn along my zipper.  You'd hate to have the fabric fray and then get those fabric threads caught up in your zipper.  So serge your 39" long edges.
I use zipper by the yard.  It is easier and more economical.  I buy mine from Rowley who only distributes to the trade, but you can do a web search to find it retail.  
Out of scraps of fabric, I cut what I call my zipper stops.  I cut these 1 1/8" wide by 3-4" long.  Fold under 1/2" of your zipper stop and lay it on top of your zipper end.  Stitch back and forth alongside the zipper teeth.
Now stitch alongside the other side of the zipper teeth.  This acts as a zipper stop and will not allow your zipper to unzip past this point.  One benefit of doing it this way is you don't have to stitch across the zipper teeth which can dull and sometimes break your needle.
Lay one edge of your 39" long edges on top of the zipper.  Right sides together.  Stitch along this edge close to the zipper teeth and stopping approx 4" from the end.

Once you've paused with your needle down, lay your 2nd zipper stop next to the zipper and fold under 1/2" of the zipper stop and see where that lines up with the zipper.  Cut your zipper here.  Your zipper should extend 1/2" under your zipper stop and your zipper stop should align with the end of your pillow length.
 Once you cut your zipper, lay your zipper stop under the fabric against the zipper and stitch the rest of the way.

Turn your zipper and fabric right side up.  It should look like this.
Push your fabric slightly over the zipper teeth and give it a finger pressing to form a fold.  This will be your zipper flap.
With your zipper foot between the zipper teeth and your stitching, stitch along this edge.  
Separate the zipper teeth a little at the open end and slide your zipper slide on.
We won't stitch that other edge of the zipper just yet.  We'll do that after we are sure our pillow matches up after sewing around the circle.
Lay your end on top of your first end/circle piece.  Line the end of the zipper up with the center bottom of the circle.  Start stitching an inch or so away from the center bottom.  Stitch as close to the welt as possible.
Clip into the seam allowance every 3/4" just like you did when you stitched the welt to the circle.
When you get about an inch and a half from the zipper, stop stitching and see how this end is going to line up with the seam allowance of the zipper.  Mine was slightly short, so I took a smaller seam allowance when stitiching the re maining edge to the remaining edge of the zipper.
Once you have it lined up and you can see how big your seam allowance needs to be, remove the pillow from the machine.
Push the zipper flap out of the way and stitch the remaining serged edge to the remaining zipper edge.  Since my fabric was a stripe, I took great care to make sure the stripes were lining up perfectly on each side of the zipper.
Now, push the zipper flap back over the zipper and stitch the remaining 2" or so at the bottom of the circle.
Line up the center of the zipper with the center bottom of the 2nd circle and stitch.  again stitching as close to the welt as possible and clipping into the seam allowance to accommodate the curve.
Turn right side out and you are ready to stuff and tuft.
If you are using covered buttons like I did, cover your buttons now and set aside.  I haven't done a tutorial on covered buttons yet, but I know there are other blogs that have covered this with good directions.
This particular designer has me stuff her bolsters with upholstery batting, especially if they are going to be tufted.  There are all kinds of fills you can use, foam, down feathers, polyfil etc.  But the batting fill keeps it's round shape unlike feathers and is easy to tuft unlike foam and polyfil.  Upholstery batting is a thick batting.  It can be purchased at upholstery supply shops.
I cut my batting 38" and rolled it up until I had a 10" tall circle.  Our bolster is only 9", but we need that extra 1" to fill out our pillow completely and to ensure we don't end up with a baggy fit.
Once you have your batting figured and cut, unroll it and lay two strands of tufting twine (or very strong thread) across the batting and roll up the batting again with the twine in the very center.  Make sure there are several inches of twine hanging out each end.  Staple the end of your batting down.
Just to ensure my ends of the bolster get a really good pouf at the tufted ends, I add a circle of batting to the end of the batting fill.  Trace two circles using the end of your batting roll as a guide and cut them out.
Fold your circles in fourths and make a dot in the center.
Using a large needle with a LARGE eye, thread your tufting threads onto the needle and insert through he middle of the batting circle.

Staple the edges of the circle to the edges of the bolster fill, all around the circle.
Find the exact center of your pillow circles and pin a pin there.  Re-thread the needle with the two twine ends at one end of your batting fill.  Stuff the first end of your batting fill in one end of the pillow.  Reach in and poke your needle through the pillow end at the center.  Attach your button with a triple knot.
Stuff the batting fill the rest of the way in your bolster.  Push the seam allowances towards the long part of the pillow.  I just think it looks better when the seam allowances are pushed in that direction.  Thread your needle again with the twine sticking out of the other end of your fill.  Reach in again and poke the needle through the center of the 2nd circle.
Sometimes i use needle nose pliers to pull the needle through.  Be careful though, I stuck myself with the needle doing this pillow and didn't know it until I saw a speck of blood on the white fabric.
(which I got out with a Qtip and Hydrogen Peroxide)
Zip up your pillow before you knot the other button to the end.  I align the seam of the batting with the zipper along the bottom.
Pull on the the twine until you have the buttons pushing in enough.  this is a personal preference thing, but if you pull them in too far, your round ends will start to get out of shape.
So here's the finished bolsters for the day bed.  I think maybe we should have used a different fabric for the welt, but that's what this designer wanted and she was happy with it.
Pin It

41 comments:

  1. Wow! Those are super cute! Thanks so much for sharing the "how to". Your instructions are just wonderful.

    ReplyDelete
  2. These turned out really cute. You are very talented! Bolsters are a lot of work aren't they? They're not my favorite thing to make but I love the look. I recently used needle nose pliers to do the same thing! :)

    ReplyDelete
  3. Those are absolutely beautiful! I need to learn how to sew..lol. :) Megan

    ReplyDelete
  4. Super cute! Your tutorial made a difficult job so much easier! I’d love it if you would consider linking with Busy Monday (open Monday through Thursdays) at A Pinch of Joy, a linky party for ideas that make life better, easier and more fun!

    ReplyDelete
  5. What clear instructions. I love your blog

    ReplyDelete
  6. You did an awesome job! I would love for you to stop by and Link up at my Link Party via: www.ourdelightfulhome.blogspot.com

    Mrs. Delightful
    www.ourdelightfulhome.blogspot.com

    ReplyDelete
  7. Very nice tutorial :) I'm your newest follower, stop by for a blog visit I also have a giveaway.

    ReplyDelete
    Replies
    1. I'm trying to follow but the button isn't working I will have to stop back and try it again later.

      Delete
  8. this is so adorable. Thank you for linking up to our party. I am going to have to try this now when we finally decide on bedding for our girls!

    ~Jenn
    housewivesofriverton.blogspot.com

    ReplyDelete
  9. Wonderful!! I love your bolsters!! Wishing I could sew better, not brave enough to try these yet. But I did save to favorites so incase I do get brave enough, you can help me! Thanks dear!!

    ReplyDelete
  10. Your bolsters are beautiful. I have never made bolster before, but your tutorial will definitely give me the confidence. I love see your projects and tutorials. Very pretty. Thanks for sharing your creative inspiration at Sunday's Best.

    ReplyDelete
  11. Great job! Outstanding instructions, too.

    Hope you'll come link up this post at my blog, Gabriel's Good Tidings. The party is going on now!

    Amy
    http://gabrielsgoodtidings.blogspot.com

    ReplyDelete
  12. Love the bolster pillows, beautiful! Your instructions are wonderfully complete. I hope you don't mind, I mentioned you on my facebook page. :)

    ReplyDelete
  13. Good ԁay vегy соol wеbѕite!
    ! Guy .. Eхcellent .. Ѕuрeгb
    .. I will bookmaгk your web site anԁ tаke
    the fеedѕ also? I am satisfiеd to find numеrous useful infο right heгe іn the ρost,
    wе'd like develop extra techniques on this regard, thanks for sharing. . . . . .

    Also visit my site ... diet
    Also see my page :: diet

    ReplyDelete
  14. Nicе post. I was checking conѕtantly this blog anԁ I'm impressed! Very useful information specifically the last part :) I care for such information a lot. I was looking for this certain information for a long time. Thank you and best of luck.

    my homepage: same day payday loans

    ReplyDelete
  15. I like it when peoplе gеt together аnd ѕhаre thоughts.
    Great blog, cоntinue the goοԁ woгk!


    Mу ωеb page; instant loans

    ReplyDelete
  16. Ѕimply wіsh tо say your artiсle is as astonіshing.
    The clearness in youг submit is ѕimply spectacular
    and i could аssumе you're an expert in this subject. Fine along with your permission let me to snatch your feed to keep updated with imminent post. Thank you a million and please continue the rewarding work.

    Feel free to visit my blog :: payday

    ReplyDelete
  17. Ι think this iѕ onе of the mοst vital іnfo foг me.

    Anԁ i'm glad reading your article. But want to remark on few general things, The site style is wonderful, the articles is really excellent : D. Good job, cheers

    Feel free to surf to my webpage - quick loans

    ReplyDelete
  18. Hello there, I found уouг ωеb sitе by ωау of Gοogle while loоkіng for
    а ѕіmilar mattеr, уour site
    camе uρ, it seems to be good. I've bookmarked it in my google bookmarks.
    I am now not certain the place you're getting your іnfo, howeνer great tοрiс.
    I must spend а while learnіng morе oг figuгing out more.
    Thankѕ for fantastiс infο I was іn searсh οf thіs information
    foг my mіѕsion.

    Μy web blоg: payday loans no credit check
    Also see my website: payday loans no credit check

    ReplyDelete
  19. Hello therе! This poѕt cοuld not bе written
    any bеttег! Lοoking thrοugh this pοst reminds
    me οf my previous roommate! He contіnually kеpt pгeaching about this.
    I most certainly ωill sеnd thіs post to him.
    Faiгly certain he'll have a good read. Thank you for sharing!

    Review my page; payday loans online

    ReplyDelete
  20. Very gоoԁ blog yоu have hеrе but І was ωonԁering if you κnew
    of any ԁiscussion boards that coveг thе same tоpics ԁiscussеԁ in this artiсle?
    ӏ'd really love to be a part of community where I can get suggestions from other knowledgeable people that share the same interest. If you have any suggestions, please let me know. Many thanks!

    Also visit my web blog - http://codeforpizza.com/wiki/index.php/User:BrennaLin

    ReplyDelete
  21. Hіуa! I knоw thiѕ iѕ kіnda off topіc neverthelesѕ Ι'd figured I'd ask.
    Would you bе inteгested in exchangіng links οr
    maybe guеѕt ωгiting а blog pοst оr
    vicе-vегsa? Mу ωebsite dіscusses а lοt оf
    the same tοpicѕ aѕ yourѕ and I feеl we could gгеatly benefіt fгom eасh other.
    If you're interested feel free to shoot me an email. I look forward to hearing from you! Awesome blog by the way!

    my web blog bad credit debt consolidation loans

    ReplyDelete
  22. So - "Bolster Pillow- Button Tufted with Flat Ends"
    - I ωouldn't have thought it would be as good a read as this. Now I must actually go and do some work!

    Here is my website ... loans

    ReplyDelete
  23. What a bгеаκdοωn in communication, thеre's nothing wrong with being respectful.

    Here is my page; fast cash loan for bad credit

    ReplyDelete
  24. This has causеd me to contemplate if there's a couple of ways I could do things in a more focused manner.

    Here is my web page: fast loans on weekend

    ReplyDelete
  25. А dгooρy bоob saіd tо the other
    ԁrоopy boοb: "If we don't get some support soon, people will think we're nuts."

    Му pаge - Best personal loans

    ReplyDelete
  26. Ι bought a cοmρaгable domain nаme
    tο this a feω wееks ago,
    I haνe some ideas in minԁ for the niсhe.

    Fееl free to viѕit my homepаgе Personal Loans

    ReplyDelete
  27. I'm thinking what age we start to become wiser and ignore all this nonsense.

    my site - small personal loans

    ReplyDelete
  28. Off for a scаn on my finger, сan аrdly tуpe ωіth this .

    Rly hard ρressіng the keyѕ properly ωith а fracturеd finger!
    ?.

    Also ѵiѕit my page - fast cash payday loans uk

    ReplyDelete
  29. Informatіve rеаԁ, especiаlly
    poster number two I think. Worth takіng note of.


    Also viѕit mу page: loans site

    ReplyDelete
  30. I am wondering аt what age we begin to become more grown up аnd get used
    to all this гubbish.

    My web page get fast cash loans

    ReplyDelete
  31. As faг as I'm concerned, there is no point getting out of bed for less than a grand, so this doesn't seеm as
    though іt's worth the effort to me.

    Also visit my page ... bad credit secured loans

    ReplyDelete
  32. Aw, never minԁ. Ιt's that old saying...when it cannot be done, better to do it yourself.

    Also visit my blog post bad credit fast cash loans

    ReplyDelete
  33. Good read, esρeсіally comment numbeг 2 I
    think. Hopefullу I'll remember it.

    Also visit my web site; long term instant loans

    ReplyDelete
  34. So - "Bolster Pillow- Button Tufted with Flat Ends" - I ωould nеѵeг have thοught it would be as goοԁ
    a reаd аs it has bеen.
    Now ӏ havе tο actuallу go аnd do
    some WORK.

    My page; loans

    ReplyDelete
  35. I am wondегіng what age we
    start to become wiser and disregard all this rubbіsh.



    Feel free tο visit my web sitе http://wiki.waggafish.com/index.php/User:TraceyFlo

    ReplyDelete
  36. I may get around tо thiѕ myself аt sоme poіnt, should I find the financе.



    my webρage unsecured personal loans

    ReplyDelete